Datasheet

D6T MEMS Thermal Sensors
OMRON D6T
Temperature
value output
Sensor
Customer
MEMS
A/D conversion
Temperature
conversion
MCU
Voltage
Bit value
Temperature value
CAN packaged thermal sensor from a competitor
Detection Temperature Range [°C]
200
80
50
5
0
-40
1×1 1×8 4×4 32x32
D6T-1A-01
D6T-1A-02
D6T-8L-09H
D6T-44L-06
D6T-44L-06H
D6T-32L-01A
D6T-8L-09
Sensor
Customer
MEMS
A/D conversion
MCU
Voltage
Bit value
Bit value output
Provision of Development Support Tool
MEMS thermal sensors can be connected to OMRON sensor evaluation boards.
The below 3 types of platform are applicable. Evaluation can be performed easily by connecting thermal sensor, evaluation
board, and harness to the platform.
Sensor
Harness for Connection
Evaluation Board Platform Sample Code
2JCIE-EV01-RP1
2JCIE-EV01-AR1
2JCIE-EV01-FT1
D6T 2JCIE-HARNESS-01
Raspberry Pi
*1
Arduino
*2
ESP32 Feather
*3
https://github.com/omron-devhub/d6t-2jcieev01-raspberrypi
https://github.com/omron-devhub/d6t-2jcieev01-arduino
https://github.com/omron-devhub/d6t-2jcieev01-arduino
*1. Raspberry Pi is a registered trademark of the Raspberry Pi Foundation. *2. Arduino is a registered trademark of Arduino LLC and Arduino SRL. *3. Feather is a registered trademark of Adafruit Industries LLC.
Easy connection
Direct temperature value output allows easy software design
Number of elements and temperature lineup
Variation of the number of elements (1 to 1024) and the
temperature range (-40 to 200°C)
2
3
6
7