Datasheet

ManualsBrandsOmron ManualsActive ComponentsTemperature sensor Bag

Photomicro Sensor Limited Reflective

Sensor

3D TOF

Sensor Module

MEMS Flow Sensor Environment Sensor MEMS Non-Contact

Thermal Sensor

Seismic Sensor MEMS Gauge

Pressure Sensor

Human Vision

Components

Sensor

Selection Guide

OMRON's unique sensing technology responds to evolving needs.

Sensor Selection Guide

MEMS Thermal Sensors

D6T

Contactless measurement with OMRON

D6T Thermal Sensors

Able to detect the slightest

temperature changes

Information of Related Products

Catalog No.

A284-E1

Catalog No.

Y232-E1

Catalog No.

A297-E1

D6T

MEMS Thermal Sensor

User's Manual

2JCIE-EV

Sensor Evaluation Board

Sensor Selection Guide

Catalog No.

X211-E1

D6F

MEMS Flow Sensor

MEMS Thermal Sensors

User’s Manual

A284-E1-0

D6T

MEMS Flow Se nsors

D6F series

Series Catalog

Faster and more accurate than ever before

MEMS flow sensor : the ideal means for mass flow measurement

Omron ﬂow sensor

so precise

even the ﬂap of a butter ﬂy’s

wings will not be missed.

Sensor Evaluation Board

2JCIE-EV

Sensor evaluation board that

supports open platform

• Easily implement development of a new IoT system

that senses a wide variety of environmental information

Features

*1.Raspberry Pi is a registered trademark of the Raspberry Pi Foundation.

*2.Arduino is a registered trademark of Arduino LLC and Arduino SRL.

*3.Feather is a registered trademark of Adafruit Industries LLC.

*4.For details, see External Expansion Sensor on page 3.

RoHS compliant

Refer to Safety Precautions on Page 9.

Temperature, humidity, light,

barometric pressure, noise, acceleration

Can be connected to a variety of sensors

(Raspberry Pi)

Raspberry Pi *1, Arduino *2, Feather *3

Easily develop sensing IoT applications and PoC

• Evaluation board with six types of sensing functions.

• The product can be connected to a Raspberry Pi *1, Arduino *2, or Feather *3 baseboard, and enables easy sensor

evaluation.

• The product can be connected to OMRON sensors (MEMS thermal sensor, MEMS flow sensor, Light convergent

reflective sensor, air quality sensor, etc.) and Qwiic sensors.

Can be connected to OMRON

sensors *4

Includes a connector that supports

Qwiic sensors.

Six types of

sensing functions

OMRON sensor evaluation board

Supports three platforms

Platform

Sample source code for acquiring sensor data is available on GitHub

Please check each region's Terms & Conditions by region website.

OMRON Corporation

Electronic and Mechanical Components Company

Regional Contact

Americas Europe

https://components.omron.com/ http://components.omron.eu/

Asia-Pacific China

https://ecb.omron.com.sg/ https://www.ecb.omron.com.cn/

Korea Japan

https://www.omron-ecb.co.kr/ https://www.omron.co.jp/ecb/

In the interest of product improvement, specifications are subject to change without notice.

Cat. No. A274-E1-05

0321(0618)

Summary of content (20 pages)

PAGE 1
D6T MEMS Thermal Sensors Contactless measurement with OMRON D6T Thermal Sensors Able to detect the slightest temperature changes
PAGE 2
D6T MEMS Thermal Sensors Contactless Measurement OMRON MEMS Thermal Sensors are able to detect the slightest temperature changes MEMS Thermal (IR sensor) measures the surface temperature of objects without touching them when the thermopile element absorbs the amount of radiant energy from the object.
PAGE 3
1 Low noise 2 Easy connection 3 Number of elements and temperature lineup World's highest-class stable temperature output* *According to OMRON's research as of February 2021, except for D6T-32L-01A.
PAGE 4
D6T MEMS Thermal Sensors 1 High Precision World's highest-class stable temperature output* *According to OMRON's research as of February 2021, except for D6T-32L-01A. Past problem n! Solutio Output was unstable in applications requiring high precision Stable temperature output OMRON D6T-1A- 01 Sensor Output Temperature [°C] 28.0 27.0 Stable output 26.0 25.0 24.0 23.0 22.0 0 5 10 15 20 25 30 Time [s] Standard Equivalent Product Sensor Output Temperature [°C] 28.0 27.
PAGE 5
-High Precision- Why? Achieves the world's highest level*2 of SNR*1 by combining the in-house designed and manufactured ASIC and MEMS In-house manufactured ASIC In-house manufactured MEMS OMRON designs and manufactures both ASIC and MEMS thermopiles in-house. OMRON's unique digital filter and process optimization reduce the noise of ASIC, achieving the world's highest-level SNR. *1 SNR: Signal-to-Noise Ratio. Compares the level of a signal to the level of background noise.
PAGE 6
D6T MEMS Thermal Sensors Easy connection 2 Direct temperature value output allows easy software design OMRON D6T CAN packaged thermal sensor from a competitor Temperature value output Bit value output MEMS Sensor Sensor MEMS Voltage Voltage A/D conversion A/D conversion Bit value Temperature conversion Bit value Temperature value Customer MCU Customer MCU Provision of Development Support Tool MEMS thermal sensors can be connected to OMRON sensor evaluation boards.
PAGE 7
Number of elements and temperature lineup 3 Variation of the number of elements (1 to 1024) and the temperature range (-40 to 200°C) 1×1 1×8 4×4 32x32 D6T-32L-01A 80 D6T-44L-06 D6T-8L-09 D6T-1A-02 50 D6T-1A-01 Detection Temperature Range [°C] D6T-8L-09H D6T-44L-06H 200 5 0 -40 7
PAGE 8
D6T MEMS Thermal Sensors Example Applications The sensors can be used in a wide range of applications, depending on the temperature measurement range. -40°C Refrigerator Interior & Room Temperature Detection Human Presence Detection Screening of Humans with Fever Able to detect temperature from a long distance Able to detect stationary human presence Contributes to automated non-contact temperature detection 36.
PAGE 9
200°C Comparison with Pyroelectric Sensor Both the pyroelectric sensor and non-contact MEMS thermal sensor can detect even the slightest amount of radiant energy from objects such as infrared radiation and convert them into temperature readings. However, unlike pyroelectric sensor that relies on motion detection, non-contact MEMS thermal sensor is able to detect the presence of stationary Abnormal High Temperature Monitoring Contributes to prevention of fires due to overheating humans (or objects).
PAGE 10
D6T MEMS Thermal Sensors Viewing Angle and Measurement Area Choose your preferred sensor viewing angle to meet your application needs. Model D6T-1A-01 D6T-1A-02 D6T-8L-09 D6T-8L-09H D6T-44L-06 D6T-44L-06H D6T-32L-01A Appearance Number of elements 10 2 4 ( 3 2 x 3 2 ) X = 26.5° X = 54.5° X=44.2° X=90.0° Y = 58.0° Y = 26.5° Y = 5.5° Y=45.7° Y=90.0° Y Y X X Y X Y X Distance 10 cm X = 11 cm X = 4.7 cm X = 10 cm X = 8.1 cm X = 20 cm Y = 11 cm Y = 4.7 cm Y = 1.0 cm Y = 8.
PAGE 11
D6T MEMS Thermal Sensors MEMS Non-Contact Thermal Sensor for Contactless Measurement • Achieves the world's highest level*2 of SNR*1 by combining the inhouse designed and manufactured ASIC and MEMS • Direct temperature value output allows easy software design • Variation of the number of elements (1 to 1024) and the temperature range (-40 to 200°C) *1. *2. SNR: Signal-to-Noise Ratio. Compares the level of a signal to the level of background noise.
PAGE 12
D6T MEMS Thermal Sensors Ratings, Specifications, and Functions Ratings Item Model D6T-1A-01 D6T-1A-02 D6T-8L-09 Power supply voltage D6T-8L-09H D6T-44L-06 D6T-44L-06H D6T-32L-01A 4.5 to 5.5 VDC -20 to 80C Storage temperature range -40 to 80C -20 to 80C -10 to 60C -20 to 80C 0 to 50C -10 to 70C 85% max. 95% max. 20% to 85% 20% to 95% (with no icing or condensation) Operating temperature range 0 to 60C -40 to 80C 95% max.
PAGE 13
D6T MEMS Thermal Sensors Object Temperature Detection Range D6T-1A-02 55 Reference temperature Ta (°C) Reference temperature Ta (°C) D6T-44L-06, D6T-8L-09, D6T-1A-01 50 45 40 35 30 25 20 80 70 60 50 40 30 20 10 0 15 -10 10 -20 5 -30 0 -5 90 : Object temperature detection range -5 0 : Object temperature detection range -40 -50 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 5 10 15 20 25 30 35 40 45 50 55 Object temperature Tx (°C) Object temperature Tx (°C) D6T-44L-06H, D6T-8L-09H
PAGE 14
D6T MEMS Thermal Sensors Field of View Characteristics D6T-44L-06 D6T-44L-06H Field of View in X Direction X View angle 44.2° Field of View in Y Direction Y View angle 45.
PAGE 15
D6T MEMS Thermal Sensors D6T-1A-01 Field of View in X Direction X View angle 58.0° Field of View in Y Direction Y View angle 58.0° Detection Area for Each Pixel X direction D6T-1A-02 Field of View in X Direction X View angle 26.5° Field of View in Y Direction Y direction Y View angle 26.5° Note: Definition of view angle: Using the maximum Sensor output as a reference, the angular range where the Sensor output is 50% or higher when the angle of the Sensor is changed is defined as the view angle.
PAGE 16
D6T Dimensions MEMS Thermal Sensors CAD Data (Unit: mm) Please visit our CAD Data website, which is noted on the last page. D6T-44L-06 D6T-44L-06H CAD Data Supporting and Mounting Area (Shaded Portion) Top View 1 18 11.5 5 R1 Two, 1 dia. 1.5 11 14 R1 3.4 1 8.3 dia. Bottom View (3.75) 1 R1 4.4 1 2.5 (0.85) 4.05 SCL GND SDA 1 VCC SM04B-GHS-TB(JST) 8.25 2.5 R1 1 Note: Due to insulation distance limitations, do not allow metal parts to come into contact with the Sensor.
PAGE 17
D6T MEMS Thermal Sensors D6T-1A-01 D6T-1A-02 Supporting and Mounting Area (Shaded Portion) Top View 2 max. 12±0.2 CAD Data 0.8 max. 2 max. 5 11.6±0.2 2 max. 0.8 max. 2 max. 8.3 dia. (3.79) Bottom View 4.4 1 SCL 4.05 0.78 GND SDA VCC 1 max. SM04B-GHS-TB(JST) 8.25 1 max. 1 max. Note: Due to insulation distance limitations, do not allow metal parts to come into contact with the Sensor. D6T-32L-01A Supporting and Mounting Area CAD Data (Shaded Portion) 1 Top View 1 18 5 4-1.3 14.
PAGE 18
D6T MEMS Thermal Sensors Safety Precautions Precautions for Correct Use ● Installation • The sensor may not achieve the characteristics given in this datasheet due to the ambient environment or installation location. Before using the Sensor, please acquire an adequate understanding and make a prior assessment of Sensor characteristics in your actual system. ● Operating Environment • Do not use the Sensor in locations where dust, dirt, oil, and other foreign matter will adhere to the lens.
PAGE 19
MEMO 19
PAGE 20
Information of Related Products D6T MEMS Thermal Sensor User's Manual MEMS Thermal Sensors D6T User’s Manual 2JCIE-EV Sensor Evaluation Board Sensor Evaluation Board 2JCIE-EV Sensor evaluation board that supports open platform • Easily implement development of a new IoT system that senses a wide variety of environmental information RoHS compliant Refer to Safety Precautions on Page 9. Features Easily develop sensing IoT applications and PoC • Evaluation board with six types of sensing functions.