User Manual

29
6. Other Settings
6.1 Disabling/Enabling Heart Zone Indicator
The heart zone indicator is enabled as default.
1. When your monitor is off, press and hold the button for more than
10 seconds.
Note
• Your monitor will automatically turn off after 3 seconds from the completion.
• To enable the heart zone indicator, follow the same steps as above.
6.2 Deleting All Readings Stored in Memory
1. Press the button, then the “ ” symbol appears.
2. While holding the button down,
press and hold the [START/STOP]
button for more than 2 seconds.
Note
• All readings will be deleted. You cannot
partially delete the readings stored in the
memory.