Datasheet

2
A6HA6H
■Ratings/Characteristics
■Dimensions (Unit: mm)
Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
■Internal Connection
Contact Form (Top View)
■Precautions
Be sure to read the Safety precautions common to all DIP Switches for correct use.
Rating (resistive load)
25 mA at 24 VDC
10 μA (minimum current) at 3.5 VDC
Ambient operating temperature –20 to +70°C at 60% max. (with no icing or condensation)
Ambient operating humidity 35% to 95% (at +5 to +35°C)
Insulation resistance 100 MΩ min. (at 250 VDC with insulation tester)
Contact resistance (initial value) 200 mΩ max.
Dielectric strength Between terminals 300 VAC for 1 min
Vibration resistance Malfunction 10 to 55 Hz, 1.5-mm double amplitude
Shock resistance Malfunction
300 m/s
2
min.
Durability Electrical 1,000 operations min.
Washing Standard models: Not possible, Models with seal tape: Possible
Degree of protection IEC IP40
Operating force 0.29 to 4.9 N {30 to 500 gf}
Weight
0.06 g (2 poles)
0.09 g (4 poles)
0.12 g (6 poles)
0.15 g (8 poles)
0.18 g (10 poles)
● Flat Actuator
Standard
A6H-@101
A6H-@101-P
A6H-@101-PM
A6H-@101-R100
With Seal Tape
A6H-@102
A6H-@102-P
A6H-@102-PM
A6H-@102-R100
Standard With seal tape
Seal tape
(t=0.05)
Dimensions of PCB Pad (Reference)
(Top View)
P: Number of poles
P: Pole numbers
A
±0.2
4.5
±0.2
1.45
0.1
1.27
1.27×(P-1)
0.6
6.7
0.6
6.7
0.76
4.9 7.4
1.27×(P-1)
±0.1
No. of poles
Model
Dimension A
Standard With seal tape
2 A6H-2101 A6H-2102 3.77
4 A6H-4101 A6H-4102 6.31
6 A6H-6101 A6H-6102 8.85
8 A6H-8101 A6H-8102 11.39
10 A6H-0101 A6H-0102 13.93
ON
12 910