User's Manual

- Node No. switch
Please set node no. with the Node No. switch that is used as the low rank value of Internet Protocol address.
192.168.250. **.
Item Description
Setting method two BCD rotary switches
Setting range 01 to 31
- Mode switch
Please set the mode of FL REMOTE ID with the mode switch.
No Name Description
0 Trigger mode When the trigger signal is input from the plc, FL REMOTE
ID begins the communication with the ID tag, and outputs
the communication result to the plc.
1 Auto mode When the ID tag approaches the antenna front, FL REMOTE
ID begins the communication with the ID tag, and outputs
the communication result to the plc.
2 Test mode FL REMOTE ID repeatedly executes the ID Tag read of eight
bytes from 00 addresses without the control from the plc
others
－
mode error