User's Manual

24
Section 2 Tags
RFID System
User’s Manual
Section 2
Specifications and Performance
 V680-D1KP66T/MT
• General Specifications
Note: For heat resistance at 150°C, Tags were left standing at 150°C for 1,000 hours and also sub-
jected to thermal shock for 1,000 cycles of 30 minutes each at −10°C and 150°C. (There were
no failures in 22 samples.)
The V680-D1KP66MT is designed to be mounted directly to metal. The V680-D1KP66T and V680-
D1KP66MT markings are shown in the following diagrams.
The side with the markings is the communications surface. Mount the Tag with this side facing the Antenna.
Item Model V680-D1KP66T V680-D1KP66MT
Memory capacity 1,000 bytes (user area)
Memory type EEPROM
Data backup time 10 years after writing
Data overwrite count 100,000 times per address (25°C)
Ambient operating
temperature when
communicating
−25 to 85°C (with no icing)
Ambient operating
temperature when not
communicating
−40 to125°C (with no icing)
Heat resistance (See note.): Thermal cycle of −10 and 150°C for 1,000 cycles of 30 min each
High-temperature storage: 1,000 hours at 150°C
Ambient storage
temperature
−40 to125°C (with no icing)
Ambient operating
humidity
35% to 95%
Degree of protection IP68 (IEC 60529)
IP67G (JEM standards)
Vibration resistance
Destruction: 10 to 2,000 Hz, 1.5-mm double amplitude, acceleration: 150 m/s
2
,10 sweeps each in
X, Y, and Z directions for 15 minutes each
Shock resistance Destruction: 500 m/s
2
, 3 times each in X, Y, and Z directions (Total: 18 times)
Dimensions 34 × 34 × 3.5 mm
Materials Case: PPS resin
Weight Approx. 6 g Approx. 7.5 g
Metal countermeasures None Yes
MADE IN JAPAN
XXXX
V680-D1KP66T
MADE IN JAPAN
XXXX
V680-D1KP66MT
METAL
V680-D1KP66MT V680-D1KP66T