User Manual

31
RFID System
User's Manual
Section 2 Amplifier
Section 2
Specifications and Performance
Nomenclature
 Antenna Connection Port
The Antenna connection port is connected a V680-series Antenna.
 Controller Connector
The Controller connector is connected to Antenna connection port on the Controller.
 Operation Indicators (LEDs)
The distance level will vary greatly depending on the surrounding environment. The setting position will serve as a
guide, but use RUN mode to conduct a sufficient number of tests in the actual operating environment.
Values of distance level 4 or above may not be displayed, but this will not affect the RUN mode performance and does
not indicate a malfunction.
Name Color Meaning
RUN Green Lit when the power is ON.
COMM
Yel-
low
Lit when a command is being sent.
NORM Green Lit when communications with a Tag are normal in Normal Communications Mode.
ERR Red Lit when an error occurs in communications with a Tag in Normal Communications Mode.
LV6/7D
Yel-
low
Maintenance Mode: Lit at distance or speed level 6.
Normal Communications Mode: Lit when a write protection error occurs.
LV5/7A
Yel-
low
Maintenance Mode: Lit at distance or speed level 5 or higher.
Normal Communications Mode: Lit when an address error occurs.
LV4/76
Yel-
low
Maintenance Mode: Lit at distance or speed level 4 or higher.
Normal Communications Mode: Lit when a Tag memory error occurs.
LV3/72
Yel-
low
Maintenance Mode: Lit at distance or speed level 3 or higher.
Normal Communications Mode: Lit when a no Tag error occurs.
LV2/71
Yel-
low
Maintenance Mode: Lit at distance or speed level 2 or higher.
Normal Communications Mode: Lit when a verification error occurs.
LV1/70
Yel-
low
Maintenance Mode: Lit at distance or speed level 1 or higher.
Normal Communications Mode: Lit when a Tag communications error occurs.
Operation indicators
RUN
COMM
NORM
ERR
LV6/7D
LV5/7A
LV4/76
LV3/72
LV2/71
LV1/70
Antenna with Separate Amplifier connection port
Controller connector