User Manual

73
RFID System
User's Manual
Section 4 Installing Tags
Section 4
Installation
V680-D1KP66T-SP
 Tag Installation Direction
Mount the ID Tags with M5 screws and washers.Tightening torque: 1.2 N.m.
There are no restrictions to the mounting direction of the ID Tags or the direction of movement for Antennas.
 Effect of Metal behind Tags (Reference)
Mounting ID Tags to metal workpieces or palettes will affect the communications capabilities. Place non-metal-
lic parts (e.g., plastic or resin) between the metallic parts by referring to the following relationship between the
distance between the ID Tag and the metallic body versus the communications distance.
Mounting hole dimensions
Two, M5
80±0.2
Y
Antenna
Communi-
cations
distance
X
Tag
Y
Communi-
cations
distance
Antenna
Metal
X
Tag
X
Y
Antenna
Tag
Communi-
cations
distance
0
10
20
30
40
50
60
70
80
90
100
10 20 30 40 50 (mm)
(%)
V680-HS52 and V680-D1KP66T-SP
The communications distance without
metal is 100%.
Distance to metal (x)
0
10
20
30
40
50
60
70
80
90
100
10 20 30 40 50 (mm)
(%)
V680-HS63 and V680-D1KP66T-SP
The communications distance without
metal is 100%.
Distance to metal (x)
0
10
20
30
40
50
60
70
80
90
100
10 20 30 40 50 (mm)
(%)
V680-HS65 and V680-D1KP66T-SP
The communications distance without metal is 100%.
Distance to metal (x)
Metal on backMetal
Metal
Metal on back
Metal