User Manual

67
RFID System
User's Manual
Section 4 Installing Tags
Section 4
Installation
Installing Tags
V680-D1KP52MT
 Tag Installation Direction
Mount Tags as shown in the diagram on the right.
The epoxy adhesives listed in the following table are recom-
mended for the given temperature ranges.
When embedding the V680-D1KP52MT into a metal surface, use the V680-HS52 Antenna.
Transmission will not be possible if the V680-HS63 Antenna is used.
 Differences in Surrounding Metals
Communications distances are affected by the type of metal in back of or surrounding the Tag, as
shown in the following table.
The values for steel are set to 100%
 Mutual Interference with Tags (Reference)
Provide the mounting distances indicated below to prevent malfunctions due to mutual interference
when using more than one Tag.
Ambient operat-
ing temperature
Product name Manufacturer
−40 to 70°C
Two-part Epoxy-com-
pound Resin:
TB2001 (main agent)/
TB2105C (curing agent)
Three Bond Co.,
Ltd.
One-part Moisture-cur-
ing Elastic Adhesive
TB1530
Three Bond Co.,
Ltd.
−40 to 150°C
One-part Epoxy Resin:
TB2285
Three Bond Co.,
Ltd.
Two-part Epoxy Resin:
TB2087
Three Bond Co.,
Ltd.
Steel SUS Brass Aluminum
V680-D1KP52MT 100% 85% to 90% 80% to 85% 80% to 85%
R0.2 max.
8.1
+0.1
0
5
+0.1
0
V680-D1KP52MT
Marked side
Marked side
V680-
D1KP52M
T
JAP
AN
dia.
25 mm min. 25 mm min.