User Manual

59
RFID System
User's Manual
Section 4 Installing Antennas
Section 4
Installation
V680-H01-V2
Be sure to insert the provided fittings into the Antenna mounting holes and mount the Antenna with
four M4 screws with spring washers and flat washers as shown below.
Securely tighten screws to a maximum torque of 1.2 N⋅m.
142.5
235±0.2
185±0.2
M4 or 4.5 dia.
Coil center
Mounting Hole Dimensions
䋨Unit䋺mm䋩
Spring washer
Flat washer
Provided fitting