User Manual

58
Section 4 Installing Antennas
RFID System
User's Manual
Section 4
Installation
V680-HS65
Securely tighten screws to a torque of 0.7 to 1.2 N⋅m.
 Mounting Bracket Dimensions (Provided Only with the V680-HS65)
Use M4 screws and spring washers (in four places) for
Antenna installation.
Tighten the screws to a torque of 0.7 to 1.2 N⋅m.
There are no restrictions on the mounting direction or
the direction of access to the Tag, but if the Antenna is to
be installed near a device such as a conveyance belt,
make sure there is no danger of the Antenna being
accidentally struck.
Four, M4
mounting holes
100
100
90±0.2
90±0.2
Four, 1-mm
corners
V680-HS65
100
±0.2
90±0.1
Four, 4.5-dia. holes
Mounting base
Mounting Bracket (provided)
90±0.1
100±0.2
Note: When installing the Antenna, mount it on the
enclosed Mounting Bracket. The Mounting
Bracket is not necessary, however, if the Antenna
is mounted on a metal base that is larger than the
Antenna (100 × 100 mm).