User's Manual

108
Section 7 Specification
RFID System
User's Manual
Section 7
Chemical Resistance
Specification
ID Sensor
 General Specifications
 Interface Cable
V680-HAM91/-HAM81
Characteristic V680-HAM91/-HAM81
Supply voltage 24 VDC (-15% to 10%) ripple (p-p) 10% is contained.
Power consumption Up to 3.5 W (At the power supply voltage 24 V. Current Up to 0.15 A. It doesn’t contain the I/O
electric current.)
Input specification Transistor output
Shortening electric current:3 mA
Turning off voltage DC15Ω to 30 V, Turning on voltage DC0Ω to 5 V
Input Imbedans 8.2 kΩ
Applied voltage DC30 V (Max.)
Output specification V680-HAM91:NPN open collector output
DC30V,20 mA(Max.)
Residual voltage Up to 2 V
V680-HAM81:PNP open collector output
DC30V,20 mA(Max.)
Residual voltage Up to 2 V
Ambient operating
temperature
At operation -10 to +55°C
(No freezing. There is no dew formation.)
At preservation -25 to +65°C
(No freezing. There is no dew formation.)
Ambient operating
humidity
At operation,At preservation 25 to 85%RH
(No freezing. There is no dew formation.
The ambient temperature of 85%RH is 40°C or less.)
Insulation resistans 20MΩ min. (with 500 VDC mega)
Between power supply terminals and ground/casing
Between power supply terminals/other unit terminals and
ground/casing
Withstand voltage 1000 VAC, 50/60 Hz, 1 min
Between power supply terminals and ground/casing
Between power supply terminals/other unit terminals and
ground/casing
Vibration resistanse 10 to 150 Hz, double amplitude: 0.2 mm, Acceleration: 150 m/s
2
,
with 10 sweep of 8 min each in 3 directions
Shock resistance Mechanical durability: 150 m/s
2
, 3times each in 6 directions
Dimensions 90 × 30 × 65 mm (excluding protruding parts)
Degree of protection IEC60529Standard IP40 (Panel-mounting)
Material PC/ABS resin
Weight Approx. 130 g
Mounting method DIN DIN rail
V680-A60 2M/5M/10M
Cable length Model
Interface Cable
(Connector: 26 pin)
2m V680-A60 2m
5m V680-A60 5m
10m V680-A60 10m
The extension cable connector is not waterproof. If necessary, place the
connector inside the control box to prevent exposed to water. The
maximum cable length is 10 m.