User's Manual

84
Section 6 Dimensions
RFID System
User's Manual
Section 6
Appendices
 Tag Heat Resistivity
• Storing Tags under high temperatures will adversely affect the performance of the internal parts and
the service life of the Tags.
• An LTPD of 10% was determined during the evaluation for Tags that reached the end of their life after
testing under the following test conditions.
LTPD: Lot tolerance percent defective
The lower limit of the malfunction rate for lots to be considered unacceptable during reliability testing.
 V680-D1KP66T-SP
Heat cycle −10°C/+150°C, 30 minutes each for 1,000 cycles
−10°C/+180°C, 30 minutes each for 200 cycles
High temperatures +150°C 1,000 hours
+180°C, 2,000 hours
Case material PFA resin
Mounting Hole Dimensions
(Unit: mm)
80±0.2
Four, R6
34
36.5
34
Two, M5
80±0.2
95
1.3
6.5
2.5
max.
Two, 5.5 dia.
(Mounting hole)