User's Manual

74
Section 6 Product Specifications
RFID System
User's Manual
Section 6
Appendices
The V680-D1KP66MT is designed to be mounted directly to metal. The V680-D1KP66T and V680-
D1KP66MT markings are shown in the following diagrams.
The side with the markings is the communications surface. Mount the Tag with this side facing the Antenna.
The ID READ command is used to write the ID code to the ID Tag's memory, and therefore will be affected by the
ambient temperature. Be careful when using the ID Tag in environments with high ambient temperatures.
V680-D1KP66T/-D1KP66MT
Item Model V680-D1KP66T V680-D1KP66MT
Memory capacity 1,000 bytes (user area)
Memory type EEPROM
Data backup time 10 years after writing (85°C or less), 2.5 years after writing (125°C max.)
Memory longevity 100,000 times per block (25°C)
Ambient operating
temperature when
communicating
−25 to 85°C (with no icing)
Ambient operating
temperature when not
communicating
−40 to 125°C (with no icing)
Ambient storage
temperature
−40 to 125°C (with no icing)
Ambient operating
humidity
35% to 95%
Degree of protection IP68 (IEC 60529) (See note.)
In-house standard for Antenna oil resistance (former JEM standard equivalent to IP67g)
Vibration resistance 10 to 2,000 Hz, 1.5-mm double amplitude, acceleration: 150 m/s
2
, 10 sweeps each in X, Y, and Z
directions for 15 minutes each
Shock resistance 500 m/s
2
, 3 times each in X, Y, and Z directions (Total: 18 times)
Dimensions 34 × 34 × 3.5 mm
Materials Case: PPS resin
Weight Approx. 6 g Approx. 7.5 g
Metal countermeasures None Yes
Note: OMRON Test Method
Usage condition: 10 m or less under water in natural conditions
1. No water ingress after 1 hour under water at 2 atmospheres of pressure.
2. Sensing distance and insulation resistance specifications must be met after 100 repetitions of half hour in 5°C water
and half hour in 85°C water.
z V680-D1KP66MT
z V680-D1KP66T