User's Manual

RFID System
User's Manual
71
Section 6 Product Specifications
Section 6
Appendices
Antenna
Four models of Antennas can be used with I/O Sensors. Select the best Antenna for the application.
 General Specifications
V680-HS51
Item Model V680-HS51
Ambient operating
temperature
−10 to 60°C (with no icing)
Ambient storage
temperature
−25 to 75°C (with no icing)
Ambient operating
humidity
35% to 95% (with no condensation)
Insulation resistance 20 MΩ min. (at 500 VDC) between cable terminals and case
Dielectric strength 1,000 VAC, 50/60Hz for 1 min between cable terminals and case
Degree of protection IP67 (IEC60529)
In-house standard for Antenna oil resistance (former JEM standard equivalent to IP67g) (Read/
Write Antenna portion)
Note: The Connector is not waterproof.
Vibration resistance 10 to 2,000 Hz variable vibration, 1.5-mm double amplitude at 150 m/s
2
acceleration, with 10
sweeps in X, Y, and Z directions for 15 minutes each
Shock resistance 1,000 m/s
2
in X, Y, and Z directions 3 times each (18 times in total)
Dimensions M12 × 35 mm
Material ABS, brass, epoxy resin filling
Weight Approx. 55 g
Cable length Standard length of 2 m
V680-HS52-W/-R
Item Model V680-HS52-W
(Standard cable, waterproof connector)
V680-HS52-R
(Flexible cable, non-waterproof connector)
Ambient operating
temperature
−10 to 60°C (with no icing)
Ambient storage
temperature
−25 to 75°C (with no icing)
Ambient operating
humidity
35% to 95% (with no condensation)
Insulation resistance 20 MΩ min. (at 500 VDC) between cable terminals and the case
Dielectric strength 1,000 VAC, 50/60 Hz for 1 min between cable terminals and case
Degree of protection IP67 (IEC60529)
In-house standard for Antenna oil resistance
(former JEM standard equivalent to IP67g)
Note: The connector specifications are IP67 and
IP65 (IEC60529).
IP67 (IEC60529)
In-house standard for Antenna oil resistance
(former JEM standard equivalent to IP67g)
Note: The connectors are not waterproof.
Vibration resistance 10 to 500 Hz, 1.5-mm double amplitude, acceleration: 100 m/s
2
, 1 sweep in each of 3 axis directions
(up/down, left/right, and forward/backward) for 8 minutes each
Shock resistance 500 m/s
2
, 3 times each in 6 directions (Total: 18 times)
Dimensions M22 × 65 mm
Material ABS resin, brass, and epoxy resin filler
Weight Approx. 850 g (with 12.5 m cable)
Cable length Standard lengths of 2 and 12.5 m