User's Manual

51
RFID System
User's Manual
Section 5 I/O Specifications
Section 5
I/O Settings and Control Methods
 V600-compatible Mode
The DeviceNet Remote ID Controller is allocated 32 inputs (2 words) and 32 outputs (2 words) in the
PLC. The inputs and outputs that are allocated (X words, Y words) depend on the node address set for
the Master and the DeviceNet Remote ID Controller.
 Master Unit to Remote ID Controller
 Remote ID Controller to Master Unit
Normal Completion
Completion with Error
Address Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
X ID7 ID6 ID5 ID4 ID3 ID2 ID1 ID0
(X+1) ID15 ID14 ID13 ID12 ID11 ID10 ID9 ID8
(X+2) ADDR7 ADDR6 ADDR5 ADDR4 ADDR3 ADDR2 ADDR1 ADDR0
(X+3) INHIBIT/
TRG
WRITE/
READ
WT_AREA WT_BYTE WT_MODE1 WT_MODE0
Address Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Y OD7 OD6 OD5 OD4 OD3 OD2 OD1 OD0
(Y+1) OD15 OD14 OD13 OD12 OD11 OD10 OD9 OD8
(Y+2) EXTOD23 EXTOD22 EXTOD21 EXTOD20 EXTOD19 EXTOD18 EXTOD17 EXTOD16
(Y+3) HS NOMAL ERROR
Address Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Y
(Y+1)
(Y+2) Hard_ERR 7E,79_ERR 7D_ERR 7A_ERR 72_ERR 71_ERR 70_ERR
(Y+3) HS NOMAL ERROR