User's Manual

43
RFID System
User's Manual
Section 4 Installing Antennas
Section 4
Installation, Connections, and Wiring
V680-HS65
Securely tighten screws to a torque of 0.7 to 1.2 N·m.
 Mounting Bracket Dimensions (Provided Only with the V680-HS65)
Use M4 screws and spring washers (in four places) for
Antenna installation.
Tighten the screws to a torque of 0.7 to 1.2 N·m.
There are no restrictions on the mounting direction or
the direction of access to the Tag, but if the Antenna is to
be installed near a device such as a conveyance belt,
make sure there is no danger of the Antenna being
accidentally struck.
Note: When installing the Antenna, mount it on the
enclosed Mounting Bracket. The Mounting Bracket
is not necessary, however, if the Antenna is
mounted on a metal base that is larger than the
Antenna (100 × 100 mm).
Four, M4
90
±0.2
90±0.2
100
100
Four, C1
90
±0.1
100 ±0.2
100 ±0.2
90 ±0.1
Four, 4.5
+0.3
0
dia.
V680-HS65
Mounting base
Mounting Bracket
(provided)