User's Manual

41
RFID System
User's Manual
Section 4 Installing Antennas
Section 4
Installation, Connections, and Wiring
Installing Antennas
V680-HS51
Install the Antenna using the nuts and toothed washers that are provided on both sides of the mounting
material, as shown in the diagram below.
Securely tighten the screws to a maximum torque of 6 N·m.
V680-HS52
Install the Antenna using the nuts and toothed washers that are provided on both sides of the mounting
material, as shown in the diagram below.
When the Antenna is mounted to a metal object, the communications distance will be reduced by approximately 10%
compared with mounting to a non-metallic object. For details on the effect of metal surrounding the Antenna, refer to
Effect of Surrounding Metals on the Antenna (Reference).
102
Securely tighten the screws to a maximum torque of 40 N·m.
12 dia.
+0.5
0
Metallic material
Nut
Toothed washers
Antenna
22 dia.
+0.5
0
Non-metallic material
Nut
Toothed washers
Antenna