User's Manual

130
Section 6 Chemical Resistance of Tags
RFID System
User's Manual
Section 6
Appendices
Applicable Models
The above table shows the extent of changes in PPS resin exposed to each chemical at room temperature and at 90°C.
If actual chemicals, concentrations, and temperatures are different from those shown in the tables, always conduct tests
under the actual conditions in which the Tags are to be used.
V680-D1KP66T/MT
Chemical
At room
temper-
ature
90°C Chemical
At room
temper-
ature
90°C
Hydrochloric acid 37% A A Sodium hypochlorite A A
10% A A Phenol solution 5% A A
Sulfuric acid 98% A B Glacial acetic acid A A
50% A A Acetic acid A A
30% A A Oleic acid A A
3% A A Methyl alcohol 95% A A
Nitric acid 60% B C Ethyl alcohol 95% A A
40% A B Ethyl acetate A A
10% A A Sebacic acid diethylhexyl A A
Hydrogen fluoride solution 40% A A Acetone A A
Chromic acid 40% A A Diethyl ether A A
Hydrogen peroxide solution 28% A B n-heptane A A
3% A A 2-2-4 trimethylpentane A A
Sodium hydroxide solution 60% A A Benzene A A
10% A A Toluene A A
1% A A Aniline A A
Ammonia solution 28% A B Mineral oil A A
10% A B Gasoline A A
Sodium chloride 10% A A Insulating oil A A
Sodium carbonate 20% A A Dichloroethylene A A
2% A A Carbon tetrachloride A A
A: Has no adverse effect, B: May cause discoloration, swelling, etc., C: Causes deformation, cracks, etc.