User's Manual

RFID System
User's Manual
103
Section 6 Reference Data
Section 6
Appendices
 V680-HS63
In addition to surface mounting, it is also possible to embed the V680-HS63 in a metal casing to protect
it from being struck by other objects. To prevent malfunctioning, allow a space of at least 30 mm
between the Antenna and the sides of the metal casing. If the space is less than 30 mm, the read/write
distance will be greatly diminished. In addition, the height of metal casing must not exceed that of the
Antenna.
Note 1: Do not bend the cable into a curve tighter than 22 mm in radius.
2: The communications distance will be reduced significantly if the Antenna is installed closer
than 30 mm to metal surfaces.
 V680-HS65
In addition to surface mounting, it is also possible to embed the V680-HS65 in a metal casing to protect
it from being struck by other objects. To prevent malfunctioning, allow a space of at least 100 mm
between the Antenna and the sides of the metal casing. If the space is less than 100 mm, the read/
write distance will be greatly diminished. In addition, the height of metal casing must not exceed that of
the Antenna.
Note 1: Do not bend the cable into a curve tighter than 22 mm in radius.
2: The communications distance will be reduced significantly if the Antenna is installed closer
than 100 mm to metal surfaces.
60 mm min.
30 mm min.
30 mm
min.
30 mm min.
30 mm min.
Metal casing
Metal casing
R22 min.
23 mm
max.
60 mm min.
100 mm min.
100 mm
min.
100 mm min.
100 mm min.
Metal casing
Metal casing
R22 min.
30 mm
max.