User's Manual

7
1-2 Example of Use of Kanban Reader
Kanban reader Model 4S2VR-V720-KR11  is developed for interfacing between man and equipment for a
situation in which reading and writing operation is performed mainly with a device like a Kanban held in a hand.
Since a laminate tag significantly varies in communication distance, a close examination should be made when this
reader is used in fixed installation.
1. Example of recording information associated with manufacturing (Process equipment number, operator
information, time, etc.) in carrying out manufacturing based on Kanban in the manufacturing process.
１．作業者は加工部品が到着すると、その中の作業指示かんばんをかんばんホルダーに差し込む。
２．作業者は部品に加工を施し、完成品を加工後のケースに入れる。
３．かんばんに加工工程で発生した情報を書き込む。（シリアルＮｏ
.
、設備Ｎｏ．、所要時間、担当など。
追加で出来高などの情報を付加して入力することもできる。）
４．加工が全て完了したら、かんばんをかんばんホルダーから抜いて、加工後のケースにつけて
次工程へ送る。
加工前
加工後
マシニングセンター
かんばんリーダ
かんばんのイメージと、かんばんリーダの
状差しイメージは、別紙をご参照ください。
4S2VR-V720KR11
Kanban holder
Photoelectric switch
Junction box
Synchronous
sensor
PS
Host
[Image of Kanban reader with Kanban holder]
Kanban
Machining center
A
fter machining
Before machining
Kanban reader
See the attached paper for the images
of Kanban and Kanban holder of the
Kanban reader.
1. When parts to be machined arrive, an operator inserts the work instruction Kanban
accompanying the parts into the Kanban holder.
2. The operator does machining of the part and puts the finished part into the machined part
box.
3. Write information associated with the machining on the Kanban (Serial No., equipment
No., required time, person in charge, etc. Additional information such as completed
quantity may be included.)
4. When all the machining is complete, withdraw the Kanban from the Kanban holder, and
attach it on the case after machining and send it to the next process.