User's Manual

ManualsBrandsOmron ManualsElectronicsKanban Reader (RFID system)

4) CN1 Connector for indicator 6P

Hoshiden type

TCP1366-71-5011

For connection with indicator (option)

1 TXD

2 RXD

3 SG

4 CLK

5 STB

6 KEY

(Connector for display) Notes 4 and 5

5) CN2 Connector for host connection

Hoshiden type

TCP1386-71-5011

Note 1

RS232C/422

1 TXD

2 RXD RS232C

3 SG

4 SD+

5 SD- RS422

6 RD+

7 RD-

8 NC

6) CN3 I/O connector 8P

Hoshiden type

TCP1386-71-5011

Note 1

Power /Synchronizing input /Judgment

output

1 VIN

···5V

2 GND···0V

3 NC

4 EXTIN

···Trigger input

5 COM+

6 OK

7 NG

8 COM-

Note 2

7) Mounting hole

φ4.5 × 2

Machining diagram of mounting hole

Note 1: CN2 and CN3 are same connectors. Use caution not to plug1in mistakenly.

Note 2: See "2-4 External I/O Circuit".

Note 3: Plug connectors of CN1, 2 and 3 are supplied with the product.

Note 4: Seal the DIP switches with the supplied seal after the completion of the initial setup.

Note 5: The indicator is an optional accessory. When the indicator is not used, seal the connector for the

indicator with the supplied seal.

φ4.5