User's Manual

27
4-5 Types of Commands
A command is specified by 2 digits ASCII.
Command name Code Description
Test ‘10’ Returns the received data to the host as it is.
Communication
control
command
Stop ‘13’ Cancels the command under execution.
Read ‘31’ Tag data is read for each page.
Write ‘32’ Data is written on the tag for each page.
(Verify After Write)
Same Data Write ‘35’ Same data is written on the tag for each page.
Data for one page can be written.
Communication
command
Write Protect Set ‘39’ The setting to disable writing on the tag is made for each
page.
* At the time of power-on or at the startup of the system, send the stop command and initialize the setting.