User's Manual

The table below shows the user memory of the tag when the following commands are executed.

Page Byte 0 Byte 1 Byte 2 Byte 3

0 30h 31h 32h 33h

1 34h 35h 36h 37h

2 38h 39h 30h 30h

3 40h 41h 42h 43h

4 44h 45h 46h 47h

5 48h 49h 4Ah 4Bh

6 4Ch 4Dh 4Eh 4Fh

7 50h 51h 52h 53h

8 52h 46h 49h 44h

9 58h 59h 5Ah 61h

10 56h 37h 32h 30h

* In case that ‘RFID’ is written on page 8 and ‘V720’ on page 10 in ASCII codes in the continue mode.

Command

‘@0* 32 3A 00 0500 RFID V720’<CR>

Response in normal state

‘@0* 00’<CR>

All the information included in ' ' is ASCII codes except the mark *.

The mark * represents (00) h.

* In case that ‘RFID’ is written on page 8 and (5246494456373230) h ‘V720’ on page 10 in hex codes in

the continue mode.

Command

‘@0* 32 2A 00 0500 5246494456373230 RFID V720’<CR>

Response in normal state ‘@0* 00’<CR>

All the information included in ' ' is ASCII codes except the mark *.

The mark * represents (00) h.

 Response in abnormal state

‘XX’

Ter mi na-

tor

Header

Exit Code

ADR

Status

See 4-7 for the exit code.