User Manual
Table Of Contents
- V670 Series
- Introduction
- Contents
- Structure of This Manual
- Chapter 1 Features and System Configuration
- Chapter 2 Specifications and Performance
- Chapter 3 Setting and Installation
- Chapter 4 Functions
- Chapter 5 Control From Host Device
- Chapter 6 How to Use Self-Execution Mode
- Chapter 7 How to Use Programming Console
- Chapter 8 From Startup to Run
- Chapter 9 Characteristic Data Depending on Operating Condition (Reference)
- Appendix
7-6
By using a programming console, the controller model V670-CD1D can check the communication with a tag at the system startup, read/
write a data of tag, check the controller setting and read the details of error.
7-5-1 Programming Console Function List
(1) MONITOR Mode
• Display of Setting
Displays every item of controller setting (DIP-SW).
• Reading/Writing
Reads/Writes the content of a tag put in front of an antenna.
• Communication Test
Used to check the communication or communication area when a tag moves.
• Latest Error Information
Displays a maximum of 30 items of error information in order of occurrence.
• Statistic Error Information
According to the error code, displays the number of errors occurred after the controller started the operation.
(2) RUN Mode
• Display of Setting
Displays every item of controller setting (DIP-SW).
• Execution Status Monitor
Displays any command, termination code, etc., which the controller received, in real time.
(3) PROGRAM Mode
This mode is unavailable in this controller.
MONITOR Mode Display of Setting
Reading/Writing
Communication Test
Latest Error Information
Statistic Error Information
Display of Setting
Execution Status Monitor
RUN Mode
PROGRAM Mode
Read
Write
Execution of Test Read
Execution of Test Write
7-5 Functions