User Manual
Table Of Contents
- V670 Series
- Introduction
- Contents
- Structure of This Manual
- Chapter 1 Features and System Configuration
- Chapter 2 Specifications and Performance
- Chapter 3 Setting and Installation
- Chapter 4 Functions
- Chapter 5 Control From Host Device
- Chapter 6 How to Use Self-Execution Mode
- Chapter 7 How to Use Programming Console
- Chapter 8 From Startup to Run
- Chapter 9 Characteristic Data Depending on Operating Condition (Reference)
- Appendix
3-1 Controller
3-8
3-1-4 How to Connect Antenna
You can connect one antenna to the controller. The antenna can be extended up to 30 m by using the extension cable model V670-A4
!
(unbundled). Only one extension cable can be used.
♦
How to connect and disconnect a connector
• How to connect
• How to disconnect
Correct Usage
Do not pull the cable forcibly. Otherwise, the cable may be broken or damaged. When you connect or disconnect the
connector, be sure to turn off the power supply. Otherwise, a trouble may occur.
Lock
(1)Hold the cable lock of connector and fit a lug of the con-
troller in a groove in the connector lock.
(2)Push the connector straight tightly.
(3)Turn the connector lock clockwise.
Lock
(1)Turn the connector lock counterclockwise.
(2)Hold the lock and pull out it straight.