User Manual
Table Of Contents
- V670 Series
- Introduction
- Contents
- Structure of This Manual
- Chapter 1 Features and System Configuration
- Chapter 2 Specifications and Performance
- Chapter 3 Setting and Installation
- Chapter 4 Functions
- Chapter 5 Control From Host Device
- Chapter 6 How to Use Self-Execution Mode
- Chapter 7 How to Use Programming Console
- Chapter 8 From Startup to Run
- Chapter 9 Characteristic Data Depending on Operating Condition (Reference)
- Appendix
2-11
Communication range varies depending on the installation conditions and environment conditions. Check the conditions mentioned in
this manual carefully.
♦ Maximum communication range (Actual value)
Measurement conditions:
2-5-1 Communication Area (Reference)
The communication area for model V670-H11 is shown below. The communication area varies depending on the installation conditions
and grounding environment.
The operation area formed on a plane, which is on an antenna center line and vertical to the antenna, is shown below.
Antenna / Controller ID Tag Communication Range (Unit: mm)
Model V670-CD1D
+ Model V670-H11
Model V670-D13F03 5 to 23 m
(Area width 20 mm or more if the range between a tag
and antenna is 5 to 20 mm.)
Tag
Antenna
Nonmetal
Nonmetal
Communication
range
Communication area characteristic
Nonmetal
Nonmetal
Tag
Antenna
2-5 Communication Range Specifications
Unit: mm