Datasheet

15
2JCIE-BU Environment Sensor (USB Type)
Safety Precautions
To assure the correct use of the product basic safety measures
should always be followed including the warnings and cautions
listed in this document.
<Common>
Warning: Improper use may result in death or serious injury.
• In places where radio communications are prohibited, turn off
the Bluetooth
®
.
• Do not place the unit closer than 22cm (9 inches) from
implantable medical devices such as pacemakers.
• Keep the unit out of the reach of young children.
If young children swallow any small piece, immediately consult
a doctor.
• Please stop using the unit immediately, if there is strange
smell or smoke from the unit.
• Do not subject the unit to extreme temperatures, humidity,
moisture, or direct sunlight.
• Internal condensation due to severe change in temperature
may cause malfunction.
<Common>
Caution: Improper use may result in minor or moderate injury to
the user or damage to the equipment.
* Property damage refers to damage related to houses and household belong-
ings, as well as domestic animals and pets.
• Do not use the unit in the field of strong electromagnetic
waves and static electricity.
• Please read the instruction manual of your smartphone or tab-
let for the wireless communication.
• This unit is not a measurement instrument.
The measured values must be treated as a reference, and do
not use it for the purpose of verification or diagnosis.
• Do not disconnect the unit from the connected device during
USB communication. Doing so may cause failure or data loss.
• Do not forcefully grip the unit or handle it in a reckless manner.
Doing so may cause the unit to be damaged or may cause
injury.
<Common>
• Do not use this product with its vent holes (both sides) and
window covered. This will prevent accurate measured values
from being obtained.
• Do not disassemble or modify the unit.
• Do not subject the unit to strong shocks or vibrations, drop it,
step on it.
• As this is a precision instrument, do not pull forcefully on its
mounting portion or subject it to stress such as twisting, bend-
ing, or shock. Doing so may cause failure or deterioration.
• Do not immerse the unit or any of the components in water.
The unit is not waterproof. Do not wash it or touch it with wet
hands. Be careful that water does not get into the unit.
• Depending on the surrounding environment and the mounting
position, the measured characteristic may vary. The measured
values must be treated as a reference.
(1) Do not subject the unit to extreme temperatures, humidity,
moisture, or direct sunlight.
(2) Do not use the unit where it will be exposed to dew con-
densation.
(3) Do not subject the unit to water, oil or chemical materials.
(4) Do not use the unit where it will be exposed to flammable
gas or corrosive vapors.
(5) Do not use the unit where it will be exposed to dust, saline
matter or iron powder.
(6) Install in a location as far away from heat-generating
instruments, etc., as possible.
• Firmware updates may be provided to improve product func-
tions or to fix bugs. Visit the following URL and search the
product name. Check the "Software" page for the appropriate
product.
https://www.components.omron.com/
<Filter cap 2JCIE-BU01-FL1>
• Do not touch the inner filter when mounting the filter cap.
• Make sure that the environment sensor body and the sensor
illumination window on the filter cap are not misaligned.
• Avoid storing the filter cap in a hot and humid place as it may
deform the filter cap.
Warning
Caution
Precautions for Correct Use