Datasheet

10
2JCIE-BL Environment Sensor
Embedding into Equipment
Block Diagram
Accessories
LED
Wireless module
Pressure sensor
Accelerometer
Temperature &
Humidity sensor
Microphone
Light Sensor
Acoustic hole
M1.4 screw (secured in 4 locations)
Tightening torque: 0.11 to 0.13 N
.
m
3.6
10
23
30
10
10
Recommended Installation Method
Embed the product so as to ensure adequate external
ventilation based on the arrangement of the sensors.
Use the fixing holes in the four corners of the PCB.
Note: Do not place any metallic components within the cross-hatched ar-
ea. Wireless communication performance may be affected in some
situations.
2JCIE-BL01-P1
Bluetooth
®
SoC
Wireless Module
Light & UV Sensor
Flash memory
Barometric pressure Sensor
Microphone
Temperature & Humidity Sensor
For 2JCIE-BL01
• Lithium battery (CR2032 × 1)
For 2JCIE-BL01-P1
• Battery terminal (+)
• Battery terminal (-)
Battery terminal (+)Battery terminal (-)
Notes on Soldering
Unless otherwise specified, perform soldering under the follow-
ing conditions.
Soldering temperature: 350°C or less (Reference: 30 W sol-
dering tool, tip temperature: approx.
320°C)
Soldering time: 3 seconds or less
Soldering location: 1.5 mm or more from the element base
Note that the tip temperature can be affected by the soldering
tool shape. Be sure to check the temperature using a ther-
mometer before use.