User Manual

92
Section 5 SETTING ADDITIONAL FUNCTIONS
ZFV-C
User’s Manual
Section 5
Setting Image Acquisition Conditions
Setting Image Acquisition Conditions
Adjusting Light Intensity and Shutter Speed
The intensity of the light from Sensor Head and shutter speed can be adjusted. [AUTO] is
selected as the default setting.
X MENU mode-[IMAGE]-[CONTRAST]
■ Lighting
The light intensity is displayed as a 4-digit number. One digit shows the light intensity
for one of four sides is displayed as a 4-digit number.
1. Select the light intensity by the UP/DOWN keys.
For partial adjustment
• LEFT/RIGHT keys: Select the side that is adjusted.
• UP/DOWN keys: Select the light intensity.
2. Press the SET Key to fix the setting.
Setting Details
AUTO (default) Light intensity and shutter speed are adjusted automatically.
FIX LIGHT The light intensity can be set for each side. 0: Out, 1 to 5: Light intensity
increases according to the number. (0 to 5, default: 5)
This menu is not displayed if ZFV-SC150/SC150W is connected.
SHUTTER
(default)
1/500, 1/1000, 1/1200, 1/1400, 1/1500, 1/2000, 1/2500, 1/3000, 1/4000, 1/8000
(“1/500” can be set only when the light intensity is set to “0000”.)
5555
ABCD
IMAGE/LIGHT
LIGHT 5555
B
AC
D
B
A
D
C
View
from here
An image of how light is emitted is displayed on screen.
The light intensity can also be adjusted
partially (A to D).
Top surface (model printed surface)
IMAGE/LIGHT
LIGHT 5555