User Manual

72
Section 4 SETTING OF INSPECTION CONDITION
ZFV-C
User’s Manual
Section 4
Inspecting by Width (WIDTH)
Inspecting by Width (WIDTH)
This item inspects the width or gap of workpieces.
It is suitable for applications such as checking lead bend and label position.
Example: Inspection of capacitor lead gap
Basic Setting Procedure
■ Teaching
Enclose the area to be inspected using a rectangular box and then perform teaching.
Set so that there are two changes in brightness such as “light to dark” or “dark to light” in the inspec-
tion area.
WIDTH
OK
WIDTH
NG
WIDTH
NG
OK
NG due to too wide
lead gap
NG due to too
narrow lead gap
WIDTH
OK
Teaching
Inspection area
setting