User Manual

Section 3 FUNCTIONS AND OPERATIONS TO BE USED

ZFV-C

User’s Manual

Section 3

Switching to Another Bank

ZFV-C can hold up to eight sets of settings. These settings can be switched externally

according as inspection condition. A set of these settings is called a “bank”.

A bank also contains the threshold value set in ADJ mode.

• What is a Bank?

■ Switching to another bank by control keys

1. Switch to MENU mode.

2. Select .

3. Select the desired bank number.

■ Switching to another bank by the external signal

A bank can be switched from one to another by combining BANK input signals 1 to 3.

This is possible with RUN mode only.

Wiring p.39

The setting for the bank switching method must be changed.

Setting the Bank Switching Method p.95

Bank switching is also possible by CompoWay/F or by entering a non-procedural command.

BANK3

BANK2

BANK1

Each set of measurement settings is

Registered as a bank.

Threshold

ADJ

RUNMENU

BANK

1.BANK1

2.BANK2

3.BANK3

4.BANK4

5.BANK5

6.BANK6

7.BANK7

8.BANK8