User Manual

Section 3 FUNCTIONS AND OPERATIONS TO BE USED

ZFV-C

User’s Manual

Section 3

Switching the Display Content

Display contents on the LCD monitor can be changed in the RUN mode. Content is

switched in the following order each time the TEACH/VIEW key is pressed. Display the

measured values suitable for your application.

The measurement time differs according to the type of display image. The measurement time for “only

image display” is the fastest. The number in parentheses ( ) serves as a guideline when “only image dis-

play” is taken as the reference.

When the image is switched during measurement, the measurement time changes. For this reason,

monitor the ENABLE signal, wait for the ENABLE signal to turn ON, and then input the TRIG signal.

In the displays showing an image, the image type (color/monochrome) is switched each time the [A]

function key is pressed.

SCORE

AVE

DRANGE

MCONT

NG%

TIME

0-100

1.000

144

● Measurement

result (*3)

● Teaching area

and Measure-

ment result (*1)

● Teaching area and

control bar (*2)

● Enlargement of mea-

surement result and

control bar (*2)

(*1) In the case of [BRIGHT], the display can be switched (average density value, density distribution value)

by the LEFT/RIGHT keys.

(*2) The control bar shows the measurement result and judgment threshold value.

(*3) The measurement time (TIME) indicated here is the shortest measurement time in “only image display”.

● Only image

display

● Judgment result

(image only display + 9 ms) (image only display + 26 ms) (image only display + 60 ms)

(image only display + 240 ms) (image only display + 95 ms) (image only display + 60 ms)