User Manual

46
Section 2 INSTALLATION & CONNECTION
ZFV-C
User’s Manual
Section 2
Sensor Head
1. Align the two hooks on one side of the
mounting fixture with the two grooves on
the Sensor Head body (light emitting
side).
2. Push the other hook.
Push down until you hear it snap into
place.
3. Make sure that the mounting fixture is
firmly fixed on the Sensor Head.
■ Removing a mounting fixture
Insert a screwdriver into the gap (one of the two gaps) between the mounting fixture
and the Sensor Head case, and remove the mounting fixture.
Hook
Grooves
Mounting fixture