User Manual

28
Section 1 FEATURES
ZFV-C
User’s Manual
Section 1
Setting Flow
Setting Flow
Measurement conditions that you have set are saved to the amplifier unit “when external TEACH signal
teaching is successful” or “when switched to RUN mode”. When the TEACH key is pressed at the teach-
ing screen to teach, conditions that you have set will not be saved unless switched to RUN mode once.
Changed contents including teaching results are cleared when switching off without saving.
Connect the sensor head and amplifier
unit.
Turn ON the power.
Installation and Connection
Installation and Connection
Adjusts the image’s focus.
Adjustment of Image
Adjustment of Image
Executing Teaching
Executing Teaching
Execute teaching, and set the
judgment criteria.
Adjusting Threshold Values
Adjusting Threshold Values
Performing Measurement
Performing Measurement
Preparation for Measurement
Setting Measurement Conditions, Checking
Settings and Starting Measurement
Adjust the threshold values used to
make judgment on measured values.
Section 2
INSTALLATION & CONNECTION
p.32
Section 2
INSTALLATION & CONNECTION
p.49
Section 4
SETTING OF INSPECTION CONDITION
Teaching Flow
p.61
Section 7
APPLICATION AND SETTING
p.149
Section 4
SETTING OF INSPECTION CONDITION
p.59
Section 3
FUNCTIONS AND OPERATIONS TO BE USED p.54