User Manual

Section 1 FEATURES

Section 1

Operation Mode

ZFV-C

User’s Manual

Operation Mode

There are 3 ZFV-C operating modes as follows. Switch to the mode that you meet, before

you start operation.

To switch the operating mode, use the mode switch.

There are two setup menus in the MENU mode. Switch the menu according to your spe-

cific requirements.

To switch the menu, use the menu selector switch.

Menu Hierarchy Differences by Menus p.16

Mode Description

MENU mode This mode is for executing teaching or setting up the measurement condi-

tions.

ADJ mode This mode is for setting the judgment threshold values.

RUN mode This mode is for performing actual measurement.

Setup Menu Description Top Screen

STD menu This is the standard menu.

First, set the measurement conditions in this menu.

EXP menu This is the expert menu.

Switch to this menu to make a more advanced setup.

ESC

ADJ

RUNMENU

EXPSTD