User Manual

24
Section 1 FEATURES
ZFV-C
User’s Manual
Section 1
Part Names and Functions
Part Names and Functions
The following describes the names and functions of parts on the Amplifier Unit and Sensor
Head.
■ Amplifier unit
No. Name Description
(1) OUTPUT indicator The Output indicator lits when the OUTPUT signal turns ON.
(2) RUN indicator The RUN indicator turns ON in the RUN mode.
(3) ERROR indicator The ERROR indicator turns ON when an error is generated.
(4) READY indicator The READY indicator lits after the amplifier unit starts up correctly.
(5) Menu selector switch This switch is for the setup menu.
STD .......Standard menu. Select this when setting the minimum required
items for measurement.
EXP .......Expert menu. Select this item when making a more detailed
setup.
(6) Mode selector switch This switch selects the operating mode.
MENU ....Select this mode when setting measurement conditions.
ADJ........Select this mode when adjusting the judgment threshold value.
RUN.......Select this mode when performing measurement.
The judgment results is output from the I/O cables only when
the RUN mode is currently selected.
(7) Control keys The Control Keys are for setting measurement conditions and other infor-
mation.
Key Operations p.57, p.60
(8) LCD monitor The LCD monitor displays setup menus and images captured from the
Sensor Head.
RUN
OUTPUT
TEACH
/VIEW
AB
CD
ERR
READY
ESC
SET
ADJ
RUNSTD EXP
MENU
(1) OUTPUT indicator
(2) RUN indicator
(7) Control keys
(11) I/O cable
(5) Menu selector switch
(10) Coupler
(8) LCD monitor
(6) Mode selector switch
(9) Sensor Head connector
(3) ERR indicator
(4) READY indicator
(13) RS-232C connector
(12) USB port