User Manual

Section 1 FEATURES
Section 1
System Configuration
21
ZFV-C
User’s Manual
System Configuration
Sensor Head
Sensor Head
Amplifier Unit
Amplifier Unit
Used for confirming images
and menus, performing
measurement processing, and
outputting the result of
processing.
ZFV-CA40/CA45
24 VDC (+10%, -15%)
Power Supply
Power Supply
Personal Computer
Personal Computer
Programmable Controller
Programmable Controller
Communication
by commands
• Communication by commands
• Saving/loading setting data and
image data by Smart Monitor ZFV
Tool
For the Smart Monitor ZFV Tool,
please contact your OMRON
representative.
USB
RS-232C
Sensor Head Extension Cable
Sensor Head Extension Cable
Lighting Unit (Option)
Lighting Unit (Option)
Peripheral Device
Basic Configuration
Detects workpieces as images.
•
Narrow view type (Field of vision 5 to 9 mm) ZFV-SC10
• Standard view type (Field of vision 10 to 50 mm) ZFV-
SC50/SC50W
• Wide view type (Field of vision 50 to 90 mm) ZFV-
SC90/SC90W
• Ultra wide view type (Field of vision 90 to 150 mm)
ZFV-SC150
/SC150W
Recommended OMRON power
supply
(1) When 1 amplifier unit is
connected S82K-03024
(DC24V, 1.3A)
(2) When 2 or more amplifier
units are connected The
power supply given in (1)
must be provided for each
amplifier unit.
Used when the amount of light by the built-in type
lighting device is insufficient or when another lighting
method like back lighting is required.
This unit can be mounted to the sensor head ZFV-
SC50/SC50W/SC90/SC90W with a single motion,
and no power supply is required for the unit.
• Bar lighting ZFV-LTL01
• Bar double-lighting ZFV-LTL02
• Bar low-angle lighting ZFV-LTL04
• Light Source for Through-beam Lighting ZFV-LTF01
[For connecting a
programmable controller]
ZS-XPT2
[For connecting a PC]
ZS-XRS2
ZFV-XC3BV2(3 m)/XC8BV2*(8 m)/XC3BRV2 (Robot
cable type, 3 m)
Used between a Sensor Head and Amplifier Unit.
Up to two extension cords can be coupled together
for each sensor head to extend the cord length.
There are no restrictions on combinations of the two
extension cords.
*
“ZFV-XC8BV2” can be used with the sensor heads
“ZFV-SC10”, “-SC50” and “-SC50W” only.