User Manual

Section 5 SETTING ADDITIONAL FUNCTIONS
Section 5
Restricting Operations (Lock Function)
105
ZFV-C
User’s Manual
Restricting Operations (Lock Function)
Setting the Lock Function
Set the lock function to restrict switch and key operations.
By restricting switch and key operations, unintended changes in settings can be pre-
vented.
Three types of operations, "mode switch", "key input", and "TEACH signal input", can be
locked.
X MENU mode-[SYS2]-[LOCK]
When mode switch operation is enabled, key operation and TEACH signal input cannot be disabled.
Standard value Description
MODE SWITCH Operation of the mode switch (MENU/ADJ/RUN) is restricted.
(Lock OFF (default), Lock ON)
KEY Operation of keys (SET, ↑ ↓ ← →, TEACH/View, and function keys A through D) is
restricted.
(Lock OFF (default), Lock ON)
TEACH IN TEACH signal input is restricted.
(Lock OFF (default), Lock ON)
PASS NUMBER The number for cancelling the lock function is set.
(Default: 0000)