User Manual

Section 5 SETTING ADDITIONAL FUNCTIONS

Section 5

Setting Image Acquisition Conditions

ZFV-C

User’s Manual

Changing the Image Display Position (Partial Function)

ZFV-C allows you to increase the processing speed by narrowing the image acquisition

area. The image area can be moved, when measurement speed is FAST mode (1/2

screen) or MAX mode (1/4 screen).

Changing the Measurement Speed p.96

X MENU mode-[IMAGE]-[DISP POS]

1. Move the image area using the UP/DOWN

keys.

2. Press the SET Key to fix the setting.

Increasing the Sensor Head Sensitivity

If the image brightness cannot be increased by either shutter speed or lighting setting,

increase the sensitivity magnification.

X MENU mode-[IMAGE]-[GAIN]

Setting value (magnification) Quality Image

X1.0 Good (small amount of noise)

↑

↓

Bad (larger amount of noise)

Dark

↑

↓

Bright

X1.5

X2.0

The center of the image is

selected just after the mea-

surement speed is

changed.

Can be moved to the

desired position vertically.

IMAGE/DISP POS

MOVE