User Manual

80
Section 4 SETTING OF INSPECTION CONDITION
ZFV-C
User’s Manual
Section 4
Inspecting by Count (COUNT)
● Selecting the color of edges
Select the direction of density change for the edge to be detected.
X MENU mode-[TEACH]-[CUSTM]-[EDGE MODE]
● Selecting the edge detection direction
Select the direction in which edges are searched.
X MENU mode-[TEACH]-[CUSTM]-[DIRECTION]
Setting Details
DARK Dark areas shown in the filtered monochrome image are assumed to be
edges.
LIGHT (default) Light areas shown in the filtered monochrome image are assumed to be
edges.
Setting Details
↓ Searches from top to bottom.
→ (default) Searches from left to right.