User Manual

Section 2 INSTALLATION & CONNECTION
Section 2
Sensor Head
49
ZFV-C
User’s Manual
■ Adjusting the Sensor Head Focus
1. Set the menu selector switch to “STD
menu” and the mode selector switch to
“MENU mode”.
2. Set the reference workpiece in place.
3. Place the cursor on and press the
SET Key.
4. Adjust the camera’s setting distance.
Refer to the graph and set the camera in a
position so that the area to be checked is
within the detection area (LCD monitor).
ADJ
RUNMENU
Reference
workpiece
MENU
TEACH
Detected distance (L)
Detection range (H)