User Manual

Section 7 APPLICATION AND SETTING
Section 7
Detecting Mixed Varieties of Campaign Seals (Area)
153
ZFV-C
User’s Manual
Adjusting the Inspection Area
6. Select [REG.] and press the SET Key.
7. Adjust the size of the inspection area and
press the SET Key.
Enlarge/reduce the screen’s green frame so
that the inspection area is slightly larger than
than the workpiece.
8. Adjust the position of the inspection area
and press the SET Key.
Move the green frame so that the target is cen-
tered in the inspection area.
Selecting the Color to be Inspected
9. Select [PICK] and press the SET Key.
10. Select [PICKAREA] and press the SET Key.
11. Adjust the size of the color pickup area and
press the SET Key.
Enlarge/reduce the window’s red frame of the
screen so that the color to be selected is
located inside the area.
TEACH/AREA2
1
point
ITEM
PICK
REG.
Zooms in/out
in vertical
direction.
Zooms in/out
horizontal
direction.
1
point
TEACH/REG.
SIZE
Vertical
direction
Horizontal
direction
1
point
TEACH/REG.
SIZE
1
point
TEACH/AREA2
PICK
ITEM
REG.
TEACH/PICK
1
point
PICKAREA
PICKCOL
Zooms in/out
in vertical
direction.
Zooms in/out
horizontal
direction.
1
point
SIZE
TEACH/PICK