User Manual

Section 6 APPENDIX
Section 6
Updating the Firmware
141
ZFV-C
User’s Manual
Connecting the amplifier unit Personal Computer
1. Connect the Amplifier Unit to the per-
sonal Computer with a USB cable.
When connecting the Amplifier Unit to a Per-
sonal computer for the first time, the USB
driver must be installed in advance.
Setting USB/RS-232C Communication
Specifications p.102
2. Turn ON the power supply to the Amplifier Unit.
• Make sure that power is supplied to the Amplifier Unit. If power is cut off during update, the Amplifier
Unit will be damaged and will not start up correctly.
• When turning the power ON, always make sure that the Amplifier Unit is not connected to other Ampli-
fier Units. If two or more Amplifier Units are connected, Warp Engine ZS will not start.
Starting Warp Engine ZS
• Do not start Warp Engine ZS unless the Amplifier Unit is recognized by the Personal Computer prop-
erly.
3. Select [Programs]-[OMRON]-[ZFV-C]-
[WarpEngineZS]
From the [Start] menu on the Personal
Computer.
The [WarpEngineZS] window will appear.
If you have failed to start Warp Engine ZS,
a message will appear, followed by the dia-
log box shown on the right. Skip to “Setting
the Connection Port”.