User Manual

106
Section 5 SETTING ADDITIONAL FUNCTIONS
ZFV-C
User’s Manual
Section 5
Restricting Operations (Lock Function)
Starting/Cancelling the Lock Function
Set the [PASS NUMBER] required for cancelling the lock function before starting the func-
tion.
■ Starting
1. In the RUN mode, press the ESC key for at least two seconds.
A start confirmation message will appear.
The start confirmation message will not appear unless an item to be restricted is set.
2. Select [EXECUTE].
The lock function is started.
A key mark is displayed in the upper-right corner of the screen while the lock func-
tion is ON (see the illustration).
■ Cancelling
1. Switch to the RUN mode and press the ESC key for at least two seconds.
A cancel confirmation message will appear.
2. Select [EXECUTE].
The pass number input screen will appear.
3. Input the pass number.
The lock function is cancelled.
Lock Function during Gang-Mounting
During gang-mounting, the lock function can be started or cancelled only on the host
device. With respect to this function, the client is in the same status as the host device.
SEARCH OK
Key mark