User Manual

96
Section 5 SETTING ADDITIONAL FUNCTIONS
ZFV-C
User’s Manual
Section 5
Setting the System Environment
Setting the System Environment
Changing the Measurement Speed
The processing speed can be increased by narrowing the image acquisition area. Change
the measurement speed according to the size of workpiece and required speed.
X MENU mode[SYS1]-[SPEED]
• If [FAST] or [MAX] is selected, it is possible to select the part of the screen to be inspected.
Changing the Image Display Position (Partial Function) p.93
• If [FAST] or [MAX] is selected, make sure that the inspection area and color selection area are within
the displayed image.
Setting Details
NORMAL (default) Acquires the entire image. (13 ms)
FAST Narrows the image acquisition area to 1/2. This will increase the measurement
speed. (8 ms)
MAX Narrows the image acquisition area to 1/4. This will increase the measurement
speed. (5 ms)
1/41/2
NORMAL
FAST
MAX
Entire image