User Manual

94
Section 5 SETTING ADDITIONAL FUNCTIONS
ZFV-C
User’s Manual
Section 5
Setting Conditions Related to Bank
Setting Conditions Related to Bank
ZFV-C can hold up to eight sets of settings. These settings can be switched according to
inspection conditions. A set of these settings is called a “bank”.
Copying Banks
Copy the settings of one bank to another bank.
The following example shows the procedure for copying the settings of BANK 1 to BANK 2.
X MENU mode-[SYS1]-[BANK SET]-[COPY]
1. Make the settings that are required to perform inspection at BANK 1 (copy
source).
2. Switch to MENU mode.
3. Select and press the SET key.
4. Select [2. BANK2] and press the SET key.
5. Select and press the SET key.
6. Select [1. BANKSET] - [1. COPY] -
[1. BANK1] (copy source).
Press the ESC Key twice to return to
MENU mode.
7. Switch to RUN mode and save the settings.
ADJ
RUNMENU
MENU
BANK
BANK
1.BANK1
2.BANK2
3.BANK3
4.BANK4
5.BANK5
6.BANK6
7.BANK7
8.BANK8
MENU
SYSTEM 1
SYSTEM 1
1.BANK SET
2.SPEED
3.MEAS TYPE
4.TCH TYPE
5.DISP COL
6.ECO MODE