User Manual

Section 4 SETTING OF INSPECTION CONDITION
Section 4
Inspecting by the Size (Area)
69
ZFV-C
User’s Manual
CUSTOM Menu
Items that can be customized
■ Items Related to Monochrome
This CUSTOM menu is provided when AREA3 is selected.
● Selecting the target color
Reverse the currently displayed binary image.
As white pixels are targeted for measurement, select which part of the measured area
is to be set to white pixels.
X MENU mode-[TEACH]-[CUSTM]-[COLOR]
● Setting binary levels
Set the level for converting the color image captured from Sensor Head to a binary
image.
X MENU mode-[TEACH]-[CUSTM]-[BINARY]
Items that can be customized Page
Items related to color Teaching brightness p.65
Items related to monochrome
(When AREA3 is selected)
Selecting the target color p.69
Setting binary levels p.69
Setting Details
WHITE (default) Select which part of the measurement area is to be set as white pixels.
BLACK
Setting Details
0 to 255 Adjust the binary level so that the measuring area is the target color.
CUSTM/BINARY
L: [ 80] H:[ 120]
LEFT/RIGHT keys: Select upper limit/lower limit.
UP/DOWN keys: Change values.
Upper/lower limit
Lower limit Upper limit