User Manual

Section 4 SETTING OF INSPECTION CONDITION

ZFV-C

User’s Manual

Section 4

Inspecting by Pattern (PATTERN)

Inspects “presence/absence” of the workpiece and judges whether the type of

workpiece is correct.

There are two measurement items for [PATTERN]: [SEARCH] and [MATCH].

● Search

Judgment is performed by whether the registered model is or is not in the inspected

area. This item works with workpieces tilted to an angle of ±45°.

Example: Inspection of upside down orientation, and color of electronic components

● Match

Select this item for inspecting shapes and recognizing different objects. Judgment is

performed by comparing the degree of match between a registered model and the tar-

get workpiece. Compared with [SEARCH], more detailed inspection is possible, and

larger workpieces can be inspected. Note, however, that this item does not work with

tilted workpieces.

Example: Inspection of wrong model and color of electronic components

ABCDE

If the workpiece is placed

in wrong orientation, NG

judgment will be made

since “ ” is not detected

in the teaching area.

NG judgment will

also be made if the

workpiece is placed

upside down.

ABCDE

MATCH

ABCDE

AFGHI

ABCDE

AFGHI

ABCDE

NG due to wrong

characters

“NG” due to inclina-

tion of the workpiece