User Manual

Section 1 FEATURES

ZFV-C

User’s Manual

Section 1

Part Names and Functions

■ ZFV-SC150/SC150W

No. Name Description

(1) Lighting part This area emits light.

(2) Receiver part This area captures a image.

(3) Connector This connector is connected to the Amplifier Unit.

(4) Sensor Head mounting

fixture

This fixture is for mounting the Sensor Head.

This fixture can be mounted on all of the four mounting surfaces.

(5) Focus adjustment control This control is used for adjusting the focus of the image.

(6) Ventilation film This film prevents the front panel from condensation.

• Do not peel off or probe the ventilation film with a sharp-

pointed object. If you do that the protective structure rating

may no longer be satisfied.

• Do not cover the ventilation film rating. Doing so might cause

the front panel to be condensed.

(7) Optional lighting connec-

tor

This connector is used to connect an optional lighting unit. (ZFV-SC50,

ZFV-SC90)

When no optional lighting unit is used, make sure that the con-

nector is covered with the cap. If not, water-resistant perfor-

mance will be deteriorated.

(2) Receiver part

(3) Connector

(5) Focus adjust-

ment control

(1) Lighting part

(6) Ventilation film